Kenmore Water Softener Troubleshooting

If you are in need of Kenmore water softener troubleshooting, the first place to look is your manual.



Often the issue is a small one that just needs a bit of attention. If your water softener was just installed, call the company that did the delivery and the installation and let them know that the job wasn't done properly and that you need the technician to return. In most cases, the company will send the technician back out within 24 hours to fix whatever they didn't do properly the first time around.

Beyond that, look over the manual and be sure to check for some of the things included in the most common Kenmore water softener troubleshooting guides. This can include a variety of potential issues that could require a little bit of attention.

One of the most common problems that don't actually require a Kenmore water softener troubleshooting guide is hose connection. If your water is trickling out of the tap or you notice that there is no water running through your pipes when you turn it on, chances are good that the problem is in the connections of the various hoses.

Make sure that each hose is secure and fastened to the proper intake or output to ensure that there is a water source running to your pipes. Don't forget to check the hose that is located behind the water softening unit. This is the tube that connects to the water main.

If all the tubes look like they are attached and intact, double check that your water is actually turned on. Technicians often have to turn off the main water supply to the home in order to install the unit. A few forgetful techs have been known to forget the importance of turning the water main supply back on once installation is complete.

If you live in a populated area you might not have the special tool needed to open your water supply or it could be locked by the city. Call the installation technician immediately and require their service one more time. This service should absolutely be free of charge.

Another common Kenmore water softener troubleshooting issue is the electrical source. This is how the unit will function and if the unit isn't plugged into a reliable outlet that can handle the load of the machine, you will have inconsistent water access. If the outlet is shorted then you probably won't have any water at all. Without reliable power the unit can't properly function.

When you start troubleshooting with the most obvious possibilities you rule out simple things that you can fix yourself. Plugging a hose back in or dealing with an outlet is not something that you usually have to call a technician for, but if you have any doubts you can certainly verify with the installation company just to be sure.

Using a troubleshooting guide to help you go through the basics can either solve the problem or help you find out that you do need to call in a professional. Taking the time to determine whether it's a small problem or a problem that you can't fix will save you from paying for a service call for something that you could have done yourself.